Compact Hard Shell Rooftop Tent 2–3 Person

Overview

The Compact Hard Shell is a smaller ABS rooftop tent designed for two people plus gear or 2–3 sleepers when you need to keep the footprint tight. It opens into a full-length sleeping space while staying low and compact on the roof when closed. The rigid ABS shell, rip-stop canvas body, and integrated mattress make it a simple, all-in-one sleeping system for vehicles with limited roof space.

Protection and use

The tent uses a hard ABS shell as the top and base, giving the fabric, mattress, and bedding a solid housing on the road. Over the fabric body, a 420D polyester Oxford rainfly adds another waterproof layer (rated 2500 mm) and is treated for UV and mold resistance. The main body is 280 g rip-stop canvas, also rated to 2500 mm, so both shell and fabric are set up to handle repeated exposure to rain and sun.

By your rule, this model is treated as a four-season hard shell, assuming appropriate bedding for the climate.

Space and layout

Inside, the sleeping footprint is 152 x 210 cm (about 60 in x 83 in, roughly 5 ft x 6 ft 11 in). This is sized for 2 adultswith room for gear at the sides, or up to 2–3 people if you pack more densely.

A high-density foam mattress, 3 cm (about 1.2 in) thick, is included and comes with a waterproof, washable cover. The mattress gives a flat, continuous surface compared to sleeping on seats or cargo and stays inside the shell when you close the tent.

Construction and access

The Compact Hard Shell is built around:

• ABS shell for the lid and base

• An internal aluminum frame for structure

• An aluminum telescopic ladder for access

The ladder adjusts to reach the ground from typical SUV and wagon roof heights and packs away with the tent. All mounting hardware is supplied by the manufacturer so the shell can be bolted to standard crossbars or a rack system.

Optional accessories from the supplier include a big awning, annex room, LED lighting, anti-condensation mat, shoe bags, and an insulation layer, allowing you to extend the living space or improve comfort in colder conditions.

Key features

• Compact ABS hard shell design – smaller footprint for vehicles with limited roof length.

• Sleeping area 152 x 210 cm (≈ 60″ x 83″) – optimised for 2 adults, usable for up to 3 people.

• High-density 3 cm foam mattress – integrated pad with waterproof, washable cover.

• 420D polyester Oxford rainfly (2500 mm) – waterproof, UV-resistant, and mold-resistant outer layer.

• 280 g rip-stop canvas body (2500 mm) – durable main tent fabric designed for regular use.

• Aluminum telescopic ladder – adjustable height, packs with the tent.

• ABS shell housing – protects fabric and bedding while driving and reduces setup steps at camp.

• Install hardware included – mounting parts supplied by the manufacturer.

• Accessory options – awning, annex room, LED light, anti-condensation mat, shoe bags, and insulation layer available from the same supplier.

Technical specifications – Compact Hard Shell

Category

• Hard shell rooftop tent (four-season by your internal classification)

Sleeping capacity

• 2–3 person

Sleeping footprint

• 152 x 210 cm

• Approx. 60 in x 83 in (about 5 ft x 6 ft 11 in)

Closed / packing size

• 170 x 135 x 38 cm

• Approx. 66.9 in x 53.1 in x 15.0 in

• Roughly 5 ft 7 in x 4 ft 5 in x 15 in

Weights

• Gross weight: 71 kg (about 157 lb)

• Net weight: 60 kg (about 132 lb)

Shell and fabric

• Shell: ABS

• Rainfly: 420D polyester Oxford, waterproof 2500 mm, UV and mold resistant

• Tent body: 280 g rip-stop canvas, waterproof 2500 mm, UV and mold resistant

Mattress

• High-density foam, 3 cm (1.2 in) thick, waterproof, washable cover

Ladder

• Aluminum telescopic ladder

Included hardware

• Roof-mounting install parts (brackets and fasteners)

Manufacturer accessory options

• Big awning

• Annex room

• LED light

• Anti-condensation mat

• Shoe bags

• Insulation layer